Differences

This shows you the differences between two versions of the page.

--- courses:courses [2022/10/11 15:36]
tzwinger [Beginner's course, Univ. Uppsala, 24+25.10.2022]
+++ courses:courses [2023/11/21 07:18] (current)
gagliar [Elmer/Ice courses - Material]
@@ Line 4: / Line 4: @@
 Since 2008, a number of Elmer/Ice courses have been instructed. In this page, you will find the presentation and the material used during these courses. Because Elmer/Ice is evolving and some errors in the presentations have been found, it is recommended to start with the latest material.
+Updated material for the most of the examples used for these different courses can also be downloaded from the [[https://github.com/ElmerCSC/ElmerIceCourses | ElmerIceCourses]] git repository.
+==== Beginner's course, CSC-IT Center for Science, Espoo, Finland, 6.-7.11.2023 ====
+Instruction how to reach CSC: https://www.csc.fi/how-to-reach-us
+=== Preparation to the course===
+We will not spend time troubleshooting not working Elmer/Ice installations at the place.
+**We expect you to bring along a working Elmer installation**.
+This can be achieved by either...
+   *  **installing the virtual appliance** (preferred solution). **Instructions** can be found [[:courses:install_appliance|here]].
+   *  **installing Elmer on your computer** (mind, that you need a working ''elmerf90'' script in this installation). Following [[compilation:compilationcmake|instructions for compilation]] can be useful. There also is a complete video instruction of installation of Elmer on Ubuntu 20 on [[https://www.youtube.com/watch?v=OZ2Lvk-hEkc|Elmer YouTube channel]].
+   * **using a remote desktop provided by CSC** - if the above mentioned methods do not work out, we can provide you with temporal access to CSC's server via a remote desktop - please, contact thomas.zwinger@csc.fi if this is necessary
+MIND: We also will need python, Gmsh and ParaView during the course (all of them being uploaded on the virtual appliance).
+We also will invite registered participants to join a to the course **dedicated Slack channel**. The channel is meant to exchange in case of troubles before and during the course, but also can be used to discuss and give feedback after the event (we will leave it open).
+If you want to start at your own pace, we also **suggest to go through the simple 2D flowline example** **[[courses:2020:online2020|from 2020 online course]]**  **before** the course. This is also a good way to test your Elmer/Ice installation.
+=== Course Material ===
+Please, follow the **[[courses:2023:helsinki2023|link to course material]]**
 ==== Beginner's course, Univ. Uppsala, 24+25.10.2022 ====
@@ Line 26: / Line 53: @@
 === Course Venue and Instructions ===
-The course will take place at the University of Uppsala, Villavägen 16, 752 36 Uppsala, SWEDEN. At place, Rickard Petterson helped us to reserve the rooms.  The detailed instructions for the different sessions are:
+The course will take place at the University of Uppsala, Villavägen 16, 752 36 Uppsala, SWEDEN. At place, Rickard Pettersson helped us to reserve the rooms.  The detailed instructions for the different sessions are:
 /10:

courses/courses.1665502593.txt.gz · Last modified: 2022/10/11 15:36 by tzwinger

Show page Old revisions

Media Manager Back to top